polyurethane pu foam crown cornice moulding machine production line-YONGJIA POLYURETHANE CO.,LTD.

polyurethane pu foam crown cornice moulding machine production line
Published：2018-05-02 16:48 　View：

Equipment components:

PU low pressure foam machine:

Equipment Characteristic:

1,High precision bent-axial type constant delivery pumps, accurate measurement, stable operation;
2,Magnetic coupling coupler with high tech permanent magnetic control, no temperature rise, no leakage;

3,High precision self clean high-pressure mixing head, high pressure injection, and impingement mixing, extremely high mixing uniformity, use no scrap, free cleaning, maintenance free. High strength material manufacturing, long service life;

4,AB material needle valves locked after balanced, ensuring no difference between AB material pressure;

5,Mixing head adopts double proximity switch control interlock function;

6,Raw material timing cycle function ensures no crystallization during downtime;
7,Full digitalization, modular integrated control all process flow, accurate, safe, intuitive, intelligent, humanization.

Technical Parameter:
Injection Output	50-5000g/s
Material tank volume	250L-500L
Injection pressure	10-20Mpa(adjustable)
Mixing ratio range	1:5~5:1(adjustable)
Injection time	0.5~99.99S(correct to 0.01S)
Compressed air needed	Dry,oil free P: 0.7Mpa Q: 600NL/min
Temperature control system	Heat: 2*9Kw
Input power	Three-phase five-wire 380V 50HZ
Total power	39KW-123KW