100 Gallons Pneumatic Agitator Mixer Mixing Machine For 200 400 Liters Container
1.There is no danger of overloading. When the pneumatic mixer is overloaded, it will not cause damage to the mixer itself, and the temperature of the fuselage will not rise. It can work continuously for a long time with full load.
2. It is suitable for stirring various open-type material tanks, and is easy to disassemble and assemble.
3.It is suitable for working in harsh environments such as flammable, explosive, vibrating, and wet.
4. Use compressed air as power, no sparks, explosion-proof.
5. The speed can be adjusted steplessly, and the speed of the motor is regulated by the pressure of the air supply and the flow valve.
6. It can be fixed on the barrel wall, and the stirring process is stable.
7. Double aluminum alloy paddles, large stirring circulation.
8. Easy to operate, easy to maintain and overhaul
| Power | 3/4HP |
| Horizontal Board | 60cm(customized) |
| Impeller diameter | 16cm or 20cm |
| Speed | 2400RPM |
| Stirring rod length | 88cm |
| Stirring capacity | 400kg |
Widely used in coatings, paints, solvents, inks, chemicals, food, beverages, medicines, rubber, leather, glue, wood, ceramics, emulsions, greases, oils, lubricating oils, epoxy resins and other open materials with medium and low viscosity liquids bucket mixing
Related products
-
High Pressure Foaming Machine For Integral Skin...
1. Overview: This equipment mainly uses TDI and MDI as chain extenders for the casting type polyurethane flexible foam process casting machine. 2. Features ①High-precision (error 3.5~5‰) and high-speed air pump are used to ensure the accuracy and stability of the material metering system. ②The raw material tank is insulated by electric heating to ensure the stability of the material temperature. ③The mixing device adopts a special sealing device (independent research and development), so tha...
-
JYYJ-2A PU Pneumatic Spraying Machine For Insul...
The JYYJ-2A polyurethane spraying machine is designed for polyurethane material spraying and coating. 1. Work efficiency can reach 60%or more, far greater than the 20% efficiency of the pneumatc machine. 2. Pneumatics drive less troubles. 3. Working pressure up to 12MPA and very stable, large displacement up to 8kg/mint. 4. Machine with soft start, the booster pump is equipped with an overpressure valve. When the pressure exceeds the set pressure, it will automatically release pressure and pr...
-
Polyurethane PU JYYJ-Q200(D) Wall Spray Foaming...
JYYJ-Q200 (D) two-component pneumatic Polyurethane Foam Sprayer Machine is used for spraying and pouring, and is used in many fields such as roof insulation of building roofs, cold storage construction, pipeline tank insulation, automobile bus and fishing boat insulation. Features 1. Secondary pressurized device to ensure fixed material proportion of equipment, improve product yield; 2. With small volume, light weight, low failure rate, easy operation and other great features; 3. Feed rate ca...
-
PU Artificial Synthetic Leather Coating Line
The coating machine is mainly used for the surface coating process of film and paper. This machine coats the rolled substrate with a layer of glue, paint or ink with a specific function, and then winds it after drying. It adopts a special multifunctional coating head, which can realize various forms of surface coating. The winding and unwinding of the coating machine are equipped with a full-speed automatic film splicing mechanism, and the PLC program tension closed loop automatic control. F...
-
Polyurethane Low Pressure Foam Injection Machin...
1.High-performance mixing device, the raw materials are spit out accurately and synchronously, and the mixture is uniform; the new sealing structure, reserved cold water circulation interface, ensures long-term continuous production without clogging; 2.High-temperature-resistant low-speed high-precision metering pump, accurate proportioning, and the error of metering accuracy does not exceed ±0.5%; 3.The flow and pressure of raw materials are adjusted by frequency conversion motor with freque...
-
50 Gallon Clamp On Drum Stainless Steel Mixer ...
1. It can be fixed on the barrel wall, and the stirring process is stable. 2. It is suitable for stirring various open-type material tanks, and is easy to disassemble and assemble. 3. Double aluminum alloy paddles, large stirring circulation. 4. Use compressed air as power, no sparks, explosion-proof. 5. The speed can be adjusted steplessly, and the speed of the motor is regulated by the pressure of the air supply and the flow valve. 6. There is no danger of overlo...