Cheap Price Chemical Tank Agitator Mixing Agitator Motor Industrial Liquid Agitator Mixer
1. The mixer can run at full load. When it is overloaded, it will only slow down or stop the speed. Once the load is removed, it will resume operation, and the mechanical failure rate is low.
2. The structure of the pneumatic mixer is simple, and the connecting rod and paddle are fixed by screws; it is easy to disassemble and assemble; and the maintenance is simple.
3. Using compressed air as the power source and air motor as the power medium, no sparks will be generated during long-term operation, explosion-proof, safe and reliable.
4.The fixed horizontal plate is made of carbon steel, the surface is pickled, phosphated and painted, and two M8 are equipped at each end of the horizontal plate
The handle screw is fixed, and there will be no movement or movement when stirring.
| Power | 1/2HP |
| Horizontal board | 60cm(customized) |
| Impeller diameter | 16cm |
| Speed | 2500RPM |
| Stirring rod length | 88cm |
| Stirring capacity | 200kg |
Widely used in coatings, paints, solvents, inks, chemicals, food, beverages, medicines, rubber, leather, glue, wood, ceramics, emulsions, greases, oils, lubricating oils, epoxy resins and other open materials with medium and low viscosity liquids bucket mixing
Related products
-
Pneumatic Polyurethane Spray Foam Machine Polyu...
One-button operation and digital display counting system, easy to master the operation method The big size cylinder makes the spraying more powerful and the atomization effect better. Add Voltmeter and Ammeter，so The voltage and current conditions inside the machine can be detected every time The electric circuit design is more humanized, engineers can check the circuit problems more quickly The heated hose voltage is lower than the human body safety voltage 36v, the operation safety is mor...
-
Open Cell Foam Planer Wall Grinding Machine Foa...
Describtion The wall after urethane spray is not clean, this tool can make the wall clean and tidy. Cut corners quickly and easily. It also uses a swivel head to feed into the wall by driving the head directly onto the stud. When used properly, this can reduce the amount of work required to operate the clipper. Operation way: 1. Use your both hands and firmly grips boths handles of the power and the cutter head. 2. start by completely trimmings the bottom two feet of the wall so you can avoid...
-
Industrial Electric Servo Motors Pneumatic Pai...
1. Using compressed air as the power source and air motor as the power medium, no sparks will be generated during long-term operation, explosion-proof, safe and reliable. 2. The air motor can run for a long time, and the temperature rise is small; it will not burn the motor due to overload, and will not generate sparks. 3. The mixer can run at full load. When it is overloaded, it will only slow down or stop the speed. Once the load is removed, it will resume operation, and the mechanical fail...
-
YJJY-3A PU Foam Polyurethane Spray Coating Machine
1.AirTAC’s original profile cylinder is used as the power for boosting to enhance the working stability of the equipment 2.It has the characteristics of low failure rate, simple operation, quick spraying, convenient movement and high cost performance. 3.The equipment adopts upgraded T5 feeding pump and 380V heating system, which solves the disadvantages of unsuitable construction when the viscosity of raw materials is high or the ambient temperature is low. 4.The main engine adopts the ...
-
Two Components High Pressure Foaming Machine PU...
Polyurethane high pressure foaming machine uses two raw materials, polyol and Isocyanate. This type of PU foam machine can be used in various industries, such as daily necessities, automobile decoration, medical equipment, sports industry, leather footwear, packaging industry, furniture industry, military industry. 1) The mixing head is light and dexterous, the structure is special and durable, the material is synchronously discharged, the stirring is uniform, and the nozzle will never be blo...
-
5 Gallon Hand Blander Mixer
Feature Introducing our Industrial-grade Pneumatic Handheld Mixer for Raw Material Paints, a cutting-edge solution designed to excel in industrial settings. This mixer is meticulously crafted to meet the demands of the manufacturing environment, offering exceptional performance and reliability. Engineered with advanced pneumatic technology, it stands as a powerhouse for seamlessly blending raw material paints and coatings. The ergonomic handheld design enhances usability while providing preci...