News
-
What Should Be Paid Attention To When The Hydraulic Lift Outrigger Is Damaged And Repaired
The temperature of the elevator pump rises too high for the following four reasons: The matching gap between the moving parts in the pump is too small, so that the moving parts are in a state of dry friction and semi-dry friction, and a lot of heat is generated; the bearing is burned out; the oil...Read more -
Lifting Platform Safety Protection Scheme
1. It is recommended to strengthen safety training and emergency drills, improve the overall quality and resilience, strengthen the applied training of professional emergency response teams, proceed from actual combat needs, pay attention to the organic combination of playground training and on-s...Read more -
What Is The Speed And Application Of On-site Foaming Of PU Foaming Machine?
Polyurethane high-pressure foaming machine refers to the special equipment for polyurethane foam infusion and foaming. Polyurethane in-situ foaming can quickly pack, buffer and fill space for large finished products in a very short time, ensuring that products are transported and stored in storag...Read more -
Product Features of PU Pipe Casting Machine
Product Features of Polyurethane Pipe Casting Machine: Integrated spraying and filling, with a wide range of applications. The mixing ratio of spray and injection is uniform, which greatly improves the product quality and saves more raw materials. The supply ratio can be adjusted to meet differen...Read more -
The Difference Between PU Spraying Cold Storage And PU Cold Storage Panel
Both polyurethane cold storage panels and polyurethane spray cold storage use the same polyurethane. The difference between the two lies in the structure and construction method. The polyurethane cold storage composite panel with polyurethane as the core material is composed of upper and lower co...Read more -
Safe Operation Of Foam Cutter
The foam cutting machine controls the x-axis and y-axis of the machine tool to move up and down, left and right through the PC cutting control system, drives the device holding the heating wire arm, and completes the two-dimensional graphics cutting according to its movement. It has the advantage...Read more -
The Construction Process Of PU Spraying
Polyurethane/polyurea spraying machine manufacturer, the equipment is suitable for thermal insulation, waterproof, anti-corrosion, pouring, etc. Polyurethane spraying needs to be done in many places. Presumably many people have seen the construction process of polyurethane spraying, but they are ...Read more -
Equipment Application Of Polyurethane Elastomer Equipment Production
Mixing head of polyurethane elastomer equipment: stirring mixing, mixing evenly. Using a new type of injection valve, the vacuum degree is good to ensure that the product has no macroscopic bubbles. Color paste can be added. The mixing head has a single controller for easy operation. Component st...Read more -
Maintenance Knowledge Of PU Foaming Machine
The well-known PU foaming machine mainly produces PU series products. The whole body of the machine is composed of a stainless steel frame, and the impact mixing method is used to make it evenly synthesized. So, what do we need to do to maintain our PU foaming machine? 1. Air pressure system of ...Read more -
The Difference Between Low Pressure Foaming Machine And High Pressure Foaming Machine
Low pressure foaming machines are widely used, mainly for the production of rigid, semi-rigid or soft polyurethane products. Product features are: 1. Intelligent digital display instrument, small temperature error; 2. To ensure accurate measurement, with high-precision low-speed metering pump, di...Read more -
Analysis And Solutions Of Common Problems In The Production Process Of PU Imitation Wood Products
Common problems in the production process of PU imitation wood products are: 1. Epidermal bubbles: The current production conditions definitely exist, but there are only a few problems. 2. Epidermal white line: The problem in the current production conditions is how to reduce the white line and r...Read more -
How To Prevent Cavitation In Polyurethane Foaming Machine
How to prevent cavitation in polyurethane foaming machine 1. Strictly control the ratio and injection volume of the original solution Control the ratio of black material, combined polyether and cyclopentane. Under the condition that the total injection volume remains unchanged, if the proportion ...Read more